ModuPIX
Tracker

Compact Particle Tracker

ModuPIX
Tracker was designed with special emphasis to particle tracking which is often required in a scientific experimental work. Two fast versatile
ModuPIX
modules are assembled and synchronised providing 3D particle tracking capability. Each module is a single Timepix device with fast parallel readout with up to 850 frames per second. The independent USB 2.0 communication channel for each device assures uncompromised read-out speed of the complete system. All modules in the system can be operated synchronously or triggered independently. The sensor type and thickness is of customer choice.

ModuPIX
Tracker can be used in variety of applications such as particle tracking, Time-of-flight imaging, multilayer Compton camera, radiation monitoring and many other. The sensors can be adapted for neutron imaging by deposition of converter layers (6LiF). The spatial resolution in some applications (thermal neutrons) can reach units of microns or even submicrometric level (ions).
  • Sensor Material:

    Si
  • Sensor Thickness:

    300 μm, 500 μm and 675 μm
  • Sensitive Area:

    14 mm x 14 mm
  • Number of Layers:

    2 layers
  • Number of Pixels in layer:

    256 x 256
  • Pixel Pitch:

    55 μm
  • Resolution:

    9 lp/mm
  • Readout Speed:

    850 frames/s
  • Photon Counting Speed:

    Up to 3 x 106 photons/s/pixel
  • Threshold Step Resolution:

    0.1 keV
  • Energy Resolution:

    0.8 keV (THL) and 2 keV (ToT)
  • Readout Chip:

    Timepix
  • Pixel Mode of Operation:

    Counting, Time-over-Threshold, Time-of -Arrival
  • Connectivity:

    USB 2.0
  • Weight:

    570 g
  • Dimensions:

    171 x 70 x 36 mm
  • Software:

    Pixet Pro

Customer References

  • Commercial Off-the-Shelf Space Product
    The Miniaturized Particle Telescope is much more compact than systems previously used. It can be held in your hand, and uses two USB connections to a laptop for all of its power and data acquisition and synchronization.

Partners