stand alone camera with WiFi connectivity

RasPIX is a very universal solution of radiation camera with an excellent connectivity (WiFi, Ethernet, USB) and portability (battery operation). The camera contains the state-of-the-art Timepix imaging detector. RasPIX can work fully autonomously being remotely controlled via internet or it can operate locally in combination with PC. It provides web based interface that can integrate data from multiple modules. The integrated data analysis provides information about type of detected radiation (X-ray/gamma, electrons, neutrons, alpha particles, MIPs, etc.).

The primary application of this device radiation monitoring where utilises its ability of recognising individual particles and measuring their energy.

The camera can be used also used in imaging applications (e.g. X-ray or neutron imaging).


 Technical Specs  
 Sensor Material:  Silicon
 Sensor Thickness:  300 μm, 500 μm and 675 μm
 Sensitive Area:  14 mm X 14 mm
 Readout Speed:  15 frames/s
 Connectivity:  USB 2.0, Wifi, bluetooth, 100 Mbit Ethernet
 Buil-in battery:  Yes
 Number of Pixels:  256 X 256
 Pixel Pitch:  55 μm
 Pixel Mode of Operation:  Counting, Time-over-Threshold, Time-of -Arrival
 Minimum Detectable Energy:  5 keV for X-rays
 Threshoid Step Resolution:  0.1 keV
 Energy Resolution:  0.8 keV (THL) and 2 keV (ToT)
 Pixel Photon Counting Speed:  1e5 photons/s/pixel
 Readout Chip:  Timepix
 Resolution:  9 lp/mm
 Weight:  240 g
 Dimensions:  97 mm x 65 mm x 35 mm (L x W x H)
 Software:  Web browser interface and PiXet


Contact Advacam for a further information or a quotation of the camera through the enquiries page.